Flat roofs are oftentimes seen on most commercial buildings because of their productivity and practical cost. The assortment of flat roofing options has developed considerably over the years. There are many types of commercial flat roofs available, but some options aren’t necessary for certain buildings.
With so many options available, it can be a little overwhelming and confusing to determine which commercial flat roof will work best for your building’s needs. You will most likely be dealing with these kinds of roofs if you’re the owner of a commercial building. Commercial flat roofs are a bit of a specialized area of expertise so it can be difficult to understand what you’re getting into, which is why we are here to help at B&M Roofing!

Although simple and utilitarian, the main goal of a roof system is to maintain the watertight integrity of a building and keep its contents dry. 

What is a Commercial Flat Roof?

A commercial flat roof is a type of roof that is almost level or has a very slight pitch, usually less than 10 degrees. Unlike pitched roofs, which have a steep slope to allow water to run off, flat roofs are generally horizontal or have a slight slope to allow water to drain toward gutters and drains.

Commercial Flat Roof Components

Many modern businesses and even some residences have a commercial flat roof protecting them from the elements . Each commercial roof component serves its own specific purpose. The construction of commercial flat roofs follows three fundamental components:

1. Weatherproofing: To keep the elements outside.
2. Reinforcement: To provide structural integrity to the roof.
3. Surfacing: To protect the rest of the roof from sunlight and weather.

Commercial Flat Roof Types

When it comes to choosing a commercial flat roofing material, there are several options available. Each material has its advantages and disadvantages, so it’s essential to consider your needs and budget before making a decision. Remember that no matter what type of roof you choose, you will need to maintain your commercial roof to keep it in good condition. Here are some common commercial flat roofing materials and their characteristics.

Built-Up Roofing (BUR):

• Also known as a tar-and-gravel roof, this is a traditional flat roofing system that uses layers of asphalt and roofing felt alternated with hot tar to create a durable and waterproof surface. These roofs are fire-resistant, low maintenance, and can last 20 years or more. These roofs don’t hold up as well as others to adverse weather conditions when compared with other types of commercial flat roofs.

Metal Roofing

• Metal roofing uses metal panels in place of shingles. The roofing panels are made from steel, aluminum, copper, or zinc. These roofs are durable and can last up to 50+ years, resistant to weather, are energy-efficient, require low maintenance, and are aesthetically pleasing. Metal roofing comes in a variety of styles and colors, and can be designed to match the style of the building. These roofs are more expensive than traditional roofing materials, tend to be noisier during storms, and their installation requires specialized equipment.

Thermoset EPDM Roof Membrane (EPDM)

• Thermoset EPDM roofing membranes are made from synthetic rubber and are commonly used as a roofing material for low-slope or flat roofs. The membrane is installed in large sheets glued or fastened to the roof deck. EPDM roofs can last 40+ years, are resistant to weathering, ultraviolet radiation, and ozone, they reflect heat and light, which helps to reduce cooling costs in the summer, and are low maintenance. EPDM roofing membranes are more expensive than other roofing materials, require specialized knowledge to install properly, and are at risk to punctures by sharp objects.

Thermoplastic Olefin (TPO) Roof:

• Thermoplastic Olefin, or TPO roofing, is a type of roofing material that is commonly used in commercial and industrial buildings. TPO is a single-ply roofing membrane made of a blend of plastic and rubber materials. The material is lightweight, flexible, and resistant to weathering, making it an ideal choice for flat or low-slope roofs. TPO roofs reflect heat and light, reducing cooling costs, reszist harsh weather, and installation is easy. This roof type is less expensive than some other roofing options, and is environmentally friendly and recyclable. This type of commercial roofing is vulnerable to punctures by sharp objects and exposure to extreme weather conditions. TPO roofs come in white or light colors.

Polyvinyl Chloride (PVC) Roof:

• PVC roofing a synthetic plastic polymer reinforced with polyester and fiberglass materials. The material is flexible, durable, and resistant to weathering, making it an ideal choice for flat or low-slope roofs. These types of commercial flat roofs reflect heat and light, are energy efficient, highly durable, fire-resistant, and are easily installed with heat-welded seams. This type of roof is typically more expensive than other roofing materials such as TPO or EPDM. Typically only available in white or light colors, these roofs can have negative environmental impacts due to its manufacturing process.

Spray Polyurethane Foam (SPF):

• SPF roofing is a combination of two liquid chemicals: polyol and isocyanate. The spraying of these chemicals onto the roof surface forms a seamless, waterproof layer. This type of roofing is a popular choice for commercial flat roofs due to its many benefits. SPF roofing has many advantages such as energy efficiency, durability, waterproofing, sustainability, and customization. These roofs provides excellent insulation, can last up to 50 years, are environmentally friendly. However, they require regular maintenance, and the chemicals used in SPF roofing can be hazardous if not handled properly.

Green Roofing

• Living roofing, also known as green roofing, is a roofing system that incorporates vegetation into the roof design. Green roofs offer several advantages, including environmental benefits such as reducing the urban heat island effect and providing natural habitats for wildlife, energy efficiency by providing insulation, aesthetic appeal with visually stunning exteriors, and longevity, lasting up to 40 years. Green roofs have higher installation and maintenance costs, potential to add weight to a building, and a risk of leaks.

B&M Roofing – Commercial Building Roof Design

B&M Roofing is a Colorado-based business with over seventy years of effective installations of many types of commercial flat roofs. We have gained notoriety for being quick, productive, and efficient in our work. We are proud to provide skilled roofing assistance to thousands of Coloradoans every year. No matter what kind of roofing services you may need, our team at B&M Roofing is happy to help!
We are here to help with your commercial flat roofing needs. Contact us today to set up services for your roof!

As business owners, you’ve got your hands full with finances, employees, and everything. It’s easy to forget about the roof, but maintaining it is crucial to protect your building, assets, and employees. Keeping your roof in top shape means a longer lifespan, better performance, and fewer costly repairs.

Please don’t wait until it’s too late to take care of your roof! This article uncovers the secrets to keeping your commercial roof in excellent condition for years. Discover the simple commercial roof maintenance tips that make a big difference, from keeping track of maintenance logs to regularly unclogging gutters and drains. So why wait? Take control of your roof’s future today and ensure its longevity!

No matter what type of commercial roof your business has, it will need maintenance. Learn more about some recommended roof maintenance tips and tricks below.

Advice for Commercial Roof Care

Commercial roofs come in various designs, each with specific features and maintenance requirements. It’s essential to consider the particular needs of your building and business when choosing a commercial roof type. You may be wondering how much does commercial roofing costs? A professional roofing contractor like B&M roofing services can help you determine the best option for your situation.

The following are a few typical styles of business roofs:

Flat Roofs

• Flat roofs are made of various materials such as built-up roofing, single-ply membrane, or spray foam and provide a flat, level surface. These are the most common commercial roofs found on most low-rise commercial buildings. Flat roofs are easy to access but require regular maintenance to prevent leaks.

Membrane Roofs

• Membrane roofs are made of synthetic materials, such as PVC or TPO, and are famous for their durability and energy efficiency. They are an excellent choice for businesses looking for a low-maintenance roofing option.

Metal Roofs

• Made of materials such as aluminum, steel, or copper, metal roofs are durable and long lasting, making them a popular choice for commercial buildings. They are also energy-efficient and fire-resistant, providing additional benefits for business owners.

Built-Up Roofs

• Built-up roofs comprise multiple layers of asphalt, gravel, and tar and are commonly on flat commercial roofs. They are a cost-effective option but require regular maintenance to keep them in good condition.

Modified Bitumen Roofs

• Modified bitumen roofs are similar to built-up roofs and are made of asphalt and a fiberglass or polyester reinforcement layer. They are durable and easy to install, making them a popular choice for commercial buildings.

Shingle Roofs

• These roofs, which come in various sizes, forms, and colors, are built of asphalt or composite materials. They are well-liked since they are inexpensive and straightforward to install.

Wood Shake Roofs

• These roofs have a rustic, natural appearance and are composed of natural wood like cedar, redwood, or pine. They are pricey compared to other roofing solutions but have a long lifespan and need regular maintenance.

Tips for Maintaining A Commercial Roof

Maintaining a commercial roof ensures longevity and protects the building’s interior. Regular inspections, cleaning, and repairs can help prevent leaks and prolong the roof’s lifespan. Here are some commercial roof maintenance tips and tricks:

Commercial Roof Maintenance Checklist

1. Keeping records of all roof maintenance activities is critical. This log should include the date of inspection, any repairs made, the type of repair, and the cost. This information can help you track trends and determine the areas of concern that need addressing. Maintaining a roof maintenance log ensures the roof is adequately cared for and provides a clear history.

Get Leaks Fixed Right Away

1. Leaking roofs can cause significant damage to the building’s interior, leading to costly repairs. As soon as you notice a leak, it would be best to take immediate action to repair it. Even for residential structures, you can call B&M commercial roofing services to diagnose the problem and make necessary repairs.

Get Your Roof Inspected Twice a Year

1. Regular roof inspections are crucial to maintaining the health of your commercial roof. During these inspections, the top undergoes thorough examination for any damage, leaks, or other issues. The best times to inspect your roof are in the spring and fall, before and after extreme weather conditions. Regular inspections help catch problems early and prevent them from becoming more extensive and expensive.

Avoid Walking on the Roof

1. Walking on the roof can cause significant damage to the roofing material, especially if its design is for pedestrian traffic. It is essential to only walk on it when it’s necessary for maintenance or repair purposes. When walking on the roof, use caution and take steps to minimize damage.

Check Your Roof after Bad Storms

1. After a severe storm, inspecting your roof for damage is essential. Look for missing or damaged shingles, cracks, punctures, and other signs of wear. If you notice any problems, it is necessary to repair them as soon as possible to prevent further damage.

Commercial Roof Preservation

1. Dirt, debris, and other materials can accumulate on the roof over time, reducing its performance and causing damage. Regular roof cleaning can help prevent this and is an integral part of regular roof maintenance. You can clean your roof using a broom or a blower, but be sure to use caution and avoid causing damage to the roofing material.

Regularly Unclog Gutters and Drains

1. Clogged gutters and drains can cause water to back up, causing damage to the roof and building. Regularly cleaning your gutters and drains is essential to roof maintenance and prevents this damage. Make sure to clear any debris, leaves, and other materials clogging the gutters and drains, and check them regularly to ensure they are functioning correctly.

Prune Overhanging Tree Branches

1. Overhanging tree branches can damage the roof by scratching or puncturing the roofing material. Regularly pruning tree branches near the roof can help prevent this damage. When pruning, take care to avoid damaging the roof and make sure to clean up any debris that may have fallen on the roof.

Get Snow Cleared in Winter Months

1. Snow can cause significant damage to a commercial roof, especially if it stays on it for an extended period. Snow can also cause the roof to collapse if too much weight is on it. It is essential to have the snow cleared from the roof as soon as possible to prevent this from happening. You can do this by using a snow rake or hiring a professional to remove the snow.

Commercial Roof Maintenance Tips in Colorado

Maintaining a commercial roof is essential to building ownership.

Regular maintenance, such as regular inspections, cleaning, and repairs, can extend the roof’s life and prevent costly repairs. Business owners can follow these commercial roof maintenance tips to keep their commercial roofs in good condition, ensuring the longevity and performance of their buildings.

B&M roofing services bring exceptional expertise and experience in roofing materials, including metal, shingles, tile, low slope, asphalt, and more. We offer skilled professional and dependable roofing services in Colorado.

The roof of a home is one of the most important and expensive investments homeowners make. It protects the house from the elements and contributes to its overall look and aesthetics. Choosing the right color for a roof is a big decision that should take with seriousness. It can be daunting to decide where to start with many available options.

This article explores the most popular roof shingle colors for residential properties and discusses the latest trends and styles.

What is the Most Popular Shingle Roof Color?

According to a recent survey, the most popular shingle roof color is black.

Black roof shingles are a timeless and versatile color that has remained a popular choice for many homeowners. Its classic and sophisticated appearance is perfect for both traditional and modern homes, making it a popular choice for many architectural styles. The color black is also great for hiding dirt and stains, which is why it is commonly better for roofing.

However, black is not the only popular color, as homeowners are also choosing shades of gray, brown, and blue to enhance the look of their homes.

Lighter roof colors are better for energy efficiency and they don’t get as hot as black shingles under the sun. So, if you’re looking to have a more energy-efficient roof, light roof shingles are popular roof shingle colors.

What are the Most Popular Roof Colors for 2023?

As we move into 2023, there is a growing trend toward more natural and earthy colors for roof shingles. The natural world inspires these colors, which are perfect for homeowners looking for colors that complement their environment and enhance the look of their homes.

Shades of brown, tan, and green are becoming increasingly popular as they often reflect the natural beauty of the surrounding landscape.

These colors are perfect for homes with natural and organic architectural styles, such as stone and wood accents. They are also easily coordinated with other design elements, such as siding, shutters, and door colors. This makes them a common option for homeowners who want a cohesive and harmonious look for their homes.

Brown roof shingles are an excellent option for those who want a color inspired by nature.

Brown roof shingles come in various shades, including light beige, chocolate brown, and deep caramel, which makes it easy to choose a color that matches the overall design of a home. Brown roof shingles are perfect for homes with natural and organic architectural styles, such as stone and wood accents.

Tan roof shingles are another popular color in 2023.

They are perfect for homeowners looking for a natural, earthy color that is easy to coordinate with other design elements. Tan roof shingles come in various shades, making it easy to choose a color that matches the overall design of a home. They are also ideal for homes with a traditional or classic architectural style.

Green roof shingles are a unique and eye-catching color that is perfect for homeowners who want to make a statement with their roofs.

Green roof shingles come in various shades, including light green, forest green, and sage green. This makes it easy to choose a color that matches the overall design of a home. Green roof shingles are perfect for homes with a natural and organic architectural style and those with a modern or contemporary design.

What is the Shingle Color of 2023?

Owens Corning is a well-known manufacturer of roofing materials, including shingles, and they have recently announced their 2023 Shingle Color of the Year: Midnight Plum.

This new color option for their Duration® Designer shingles is expected to be very popular among homeowners who are looking for a modern and sophisticated color palette for their roofs.

Midnight Plum is a rich, deep shade of purple that offers a unique look for residential roofing. This color is a perfect blend of blue and red tones, creating a distinct hue that can complement various exterior design styles. It is a versatile color that can work with a range of home styles, from traditional to contemporary. It can be an excellent choice for homeowners who want to make a bold statement with their roofing color.

In addition to its striking appearance, Owens Corning’s Duration® Designer shingles are also designed for durability and longevity. They are made with patented SureNail® Technology, which ensures they stay in place even in high winds. They are also engineered with StreakGuard™ Algae Resistance Protection, which helps prevent the growth of algae, protecting the appearance of the shingles over time.

Midnight Plum is just one of many color options available from Owens Corning for their Duration® Designer shingles. This color is expected to be in high demand for 2023 and beyond, especially as homeowners continue to look for ways to add curb appeal to their homes. If you’re in the market for new roofing, Midnight Plum may be an excellent option to consider for its unique and modern look.

What is the Most Popular Roof Trend for 2023?

In 2023, the trend for roofing is tending towards natural and earthy colors such as shades of brown, tan, and green. These colors, inspired by nature, complement many architectural styles. They are also easily coordinated with other design elements like siding, shutters, and door colors.

Aside from color, homeowners prefer high-quality, long-lasting roofing materials that can withstand harsh weather and provide long-term protection for their homes. GAF and Owens Corning, for example, provide a wide range of roofing materials and colors to meet the needs of homeowners in terms of both style and durability.

Colorado’s Weather and Roof Shingle Color Selection

In Colorado, the weather can often be extremely harsh, with hot summers and cold winters. Colorado’s weather can cause roof shingles to fade, discolor, crack, or become brittle.

Therefore, homeowners in Colorado need to choose a roof shingle color that can withstand the elements and maintain its appearance over time. Homeowners should consider the overall appearance of their home and the climate and weather conditions when choosing a roof shingle color.

Shades of brown, tan, and green are popular roof shingle colors in Colorado, as the inspiration is by nature and complements a wide range of architectural styles. They are also easily coordinated with other design elements, such as siding, shutters, and door colors. Black and gray are also popular roof shingle colors in Colorado, as they are timeless and versatile. These colors are perfect for homeowners who want a classic and sophisticated look for their homes.

It’s important to consider the color and durability of the roof shingles when choosing a roof shingle color in Colorado. GAF, Owens Corning, and other roofing shingle suppliers provide a wide range of roofing materials. These come in different colors specifically made to withstand the elements and provide long-term protection for Colorado homes. Choose an appealing roof shingle color whether you are constructing a new house or remodeling an existing one. It must also provide adequate protection for your home in Colorado’s harsh climate.

B&M Roofing and Residential Roofing

B&M Roofing has extensive experience in residential and commercial roofing, with a Colorado company providing quality service throughout the Centennial State since 1947.

The premier Colorado commercial roofing contractor uses only the highest quality roofing shingle suppliers: GAF and Owens Corning. We offer a wide range of colors and styles to choose from, ensuring that we can match the right roof shingle color to any home’s style.

We work with brands like GAF and Owens Corning to offer you a variety of roofing materials and colors to choose from and allow you to find the perfect color for your home. B&M is always available to help give your home’s roof the beauty it deserves.

There are different roofing companies in Denver, Colorado, and B&M Roofing is one of the industry leaders. These roofing companies render different services, ranging from commercial to residential. So, irrespective of your roofing needs, a roofing company in Denver, Colorado, can cater to your needs.

But what exactly can you expect from these roofing companies in Denver? Is it important to hire one? And who are the top roofers in Denver? This article answers these questions and more.

What Do Roofing Companies Do in Colorado?

Before discussing what roofing companies do in Colorado, it is essential to explain the different types of roofers there are in Denver, Colorado.

• Commercial Roofers: Commercial roofing services focuses on installing or replacing flat roofs and other industrial applications. They focus primarily on commercial construction and sometimes carry out residential projects.
• Residential Roofers: As the name implies, residential roofing services focus on personal homes. Residential roofers work on shingle and metal roof installation, maintenance, repair, and replacement.
• Industrial Roofers: Industrial roofing services deal with maintaining and repairing industrial roofs. Industrial roofers focus on metal roofs and industrial applications.
• Roofing Contractors: This refers to roofers who work on commercial and residential buildings. If you need a general contractor, it is best to go with roofing contractors in Denver, as they have experience in both roofing types. Also, roofing contractors act as a one-stop shop for all your roofing needs.

Now, what do these roofing companies in Colorado do?

Roof Installation

Roof installation is quite common, and it involves putting a new roof on your house or business structure. Installing a new roof takes time and requires the expertise of seasoned roofers. So, carefully choose the roofing company to handle this project.

Roof Repair

Roof repair is another common service rendered by roofing companies in Denver. However, unlike roof installation, the focus here is on fixing any damaged part of your roof. For this to happen, the roofing contractor will assess the damage and tell you what repair the roof needs.

Roof Replacement

Replacement is different from repair. Here, you might have to haul an entire section rather than fix a damaged part of the roof. This makes roof replacement a job for the experts, so hire a reputable roofing company.

Removal of Waste and Cleaning of Debris

Most roofing companies offer waste removal and cleaning of debris on the rooftop as part of their services. This service is particularly sought after a heavy storm or other acts of nature damage the rooftop.

Emergency Services

Colorado is no stranger to storms like hail, tornados, snow storms, etc., and it causes severe damage to rooftops. You can contact a roofing contractor that renders emergency services in such instances. These services are available all week long for 24 hours.

Why Is It Important to Hire a Roofing Company in Denver?

Aside from using top-notch roofing materials when roofing your home, the roofing contractor you work with ensures you get a well-installed roof. To this end, it is prudent to work with a local roofing company in Denver. The following are several reasons why you should choose a local roofer:

• You can verify their licenses and references, as local businesses thrive on referrals.
• Local roofing companies in Denver know local building codes that must be met. Therefore, there are fewer avenues for issues with non-compliance, which might delay your roofing project.
• Working with local roofers gives you access to quick and prompt service delivery. Also, you can contact them easily or visit their office if there’s an issue with the roof.
• You get easy access to emergency services in case of storms or serious accidents that impact your roof.
• You get better-personalized service as local Denver roofers dedicate their time to their customers, something roofing companies outside the may be unable to offer.

Do Commercial Roofers Need to be Licensed in Denver?

Yes. Generally, Colorado classifies roofing contractors — including commercial roofers — as general contractors. As such, they are not required to carry a special state license. However, they must have a business license, which shows that the company has been active for a minimum of two years.

A roofing company must have a valid and current business license to obtain a permit for an extensive project. In addition to the preceding, they must carry a Class D-Roof Covering and Waterproofing license. If the roofing project involves significant structural work, the roofing contractor needs a Class A or Class B General Contractor License.

How to Select the Best Roofing Company in Denver

Just because a roofing company is one of the best in Denver does not mean they are the right fit for you. So how do you select the best roofing company for your needs?

Here are some helpful tips:

• Research the company online and check past client reviews
• Speak to your neighbors and ask them the company that handles their roofing job
• Visit the company’s website to familiarize yourself with their services
• Find out the company’s years and level of experience
• Compare prices with other roofing companies in Denver
• Interview the roofing company and stay objective
• Check to see if the company has a free estimate system

Trust B&M Roofing With Your Roofing Needs

At B&M Roofing, we are committed to rendering top-notch services to all our residential and commercial clients. We are available all year, whether you need repairs, installations, or replacements. So, request a free estimate today!

Every state in the United States has its snow load requirement, including Colorado.

The term “snow load calculator” refers to the weight of accumulated snow and ice on a roof. These requirements are based on the region’s recorded snowfall. When there is too much snow on a roof, and it cannot sustain the weight of that snow and ice, it will collapse.

What Is A Snow Load Roofing Requirement?

A snow load roofing requirement is a requirement that dictates the amount of snow a roof in a particular state (in this case, Colorado) must be able to hold.

Due to the differences in snowfall between states, every snow load roofing requirement varies from state to state. Without snow load roofing requirements, many buildings in states that experience extreme snowfall would collapse quickly due to being unable to hold and sustain large amounts of snow.

Snow Load Requirements Vary By Region

Every state, generally speaking, experiences a different amount of annual snowfall. Colorado, for example, often receives an average of sixty inches of snow to one hundred inches, depending on the region, which is quite a bit higher than other states.

To ensure that the buildings in a particular state can withstand that amount of snow, every state has its snow load roofing requirement. A snow load roofing requirement ensures that every roof can withstand a certain amount of snow, which ensures that those roofs, and the buildings that they protect, can last for a long time.

Since the amount of snow differs from region to region, different regions have different snow load roofing requirements. An example of this is Clear Creek County in Colorado, which has a rather mountainous geography that consists of numerous elevations. Each one of these elevations, measured in feet above sea level per 250 feet, has a different snow load requirement due to the amount of snow that higher elevations experience.

A snow load roofing requirement is often measured in “Pounds Per Square-Foot”.

Every square foot on a particular roof must be able to hold and sustain a certain amount of snow and ice, and the snow and ice are measured in pounds. Clear Creek County, for example, has a snow load roofing requirement of 35 PSF for homes and buildings built at an elevation of 6,500 to 6,750 feet while also having a snow load roofing requirement of 45 PSF for built at an elevation of 7,001 to 7,250 feet.

A snow load roofing requirement is extremely important because it ensures that every roof made and set up within the state can handle the snow that a particular region experiences. Without snow load roofing requirements, many of the roofs built and used within a state would be incapable of handling the intense weather that a particular region often experiences. Because of that, they would break down and collapse rather easily.

How Do You Calculate Snow Load?

Calculating your roof’s snow load is quite easy, but it consists of several steps, some of which are more elaborate than others.

The process will differ depending on the type of roof that you have – a flat roof or a pitched roof.

By calculating your roof’s snow load, though, you will be able to know just how much snow your roof can withstand and whether or not it will be able to withstand the intensity of Colorado’s winter.

Calculating Roof Pitch

To calculate the snow load of a pitched roof, you must know the pitch of your roof, which is how much it slants. To do this, you will need to measure the vertical distance between your roof’s peak and edge. Then you will need to measure the horizontal distance from your roof’s peak to its edge.

Rise and Run

The first of those measurements is called the rise, and the second is called the “run”. Once you have both of those measurements, you will need to divide the rise by the run (rise over run), and then you must convert the fraction that comes from that division into a ratio of twelve.

For example, if the rise of your roof is 30 feet, and the run is 60 feet, then the pitch of your roof is 30 divided into 60. Once you divide the sum of that division – 0.5, to be specific – into a ratio of twelve, it becomes 6:12. Your “roof pitch” would be 6:12.

Snow Load Calculator

After that measurement, you will need to use a snow load calculator. To use this calculator, you will need to input information regarding the rise and run of your roof, the pitch of your roof, what it’s made of, and snowfall for your area, among other information.

The snow load calculator for a roof is slightly more difficult to calculate since there needs to be snow on the roof for you to calculate the snow load.

Snow Cover

Once there is snow on your roof, though, you will need to measure just how deep that snow is. Doing this is easy if you use a yardstick. Take that measurement, which will usually be expressed in inches, and convert it to feet.

Right after you know the depth of the snow, you will need to gather up snow from your roof. Make sure this container is one-foot high and one-foot wide. Stuff the entirety of the container with snow, but before you do so, make sure to measure the container.

Snow Type/Density

By weighing that container of snow, you will know just how much one cubic foot of snow weighs. From this measurement, you can multiply the cubic-foot of snow based on the depth of the snow, and the size of your roof.

As an example, if one cubic-foot of snow weighs eight pounds – quite common for dry snow – and there are two feet of snow on your roof, then every cubic-foot of your roof is holding sixteen-pounds of snow. Take that measurement, and multiply it based on the square footage of your roof.

What Does B&M Roofing Offer To Help With Snow Load Roofing Requirements In Colorado?

As a local company, B&M Roofing is very familiar with all of Colorado’s snow load roofing requirements and assorted building codes. We know Colorado’s extreme weather and all of our roofing projects take that element into account.

Every single roof that we construct for your home or business will meet these building codes and snow load roofing requirements, while also fulfilling every single other requirement that is required for the durability and stability of your roof. We can also help with calculating your roof’s pitch and snow load if needed.

For a free estimate regarding our services, you can contact us here. Regardless of your roofing needs (and season), B&M Roofing is here to help.

At B&M Roofing, we offer a variety of metal roofing in Colorado services that are reliable and top quality. Metal roofs can feel like a pricey investment. Still, they’re durable and withstand several environmental factors—a huge bonus for homeowners and commercial property managers in the Colorado region.

We’ve been in business since 1947 and strive for quality, trustworthy services. Our metal roofing in Colorado services include:

• New construction or installation.
• Repair or replacement.
• Ongoing maintenance.
• Restoration of exterior architectural sheet metals.

Due to their durability and longevity, metal roofing is a great choice for commercial and residential properties. Learn more about our metal roofing in Colorado below.

What Are The Benefits Of Having A Metal Roof?

Metal roofs offer a plethora of different benefits. Benefits such as:

• Durability.
• Longevity.
• Energy efficiency.
• Environmentally-friendly.

But, along with that, metal roofs are great in Colorado because they protect against intense weather events, such as strong wind and heavy snow. In addition, most metal roofs are completely impact-resistant, will never corrode or decay, and can sustain changing weather and drastic storms.

Seeking a roofing contractor. Here are some guidelines to consider before hiring a Colorado roofing expert for your residential property. Be sure to work with only a reputable source supplying warranties and insurance, like B&M Roofing.

The durability of Metal Roofing Colorado

On average, a metal roof lasts anywhere from forty- to seventy years, which is far more than many other roofs. For example, asphalt roofs tend to only last for twenty years. Because of this longevity, metal roofs tend to pay for themselves. Take a look at the metal roofing vs. shingles comparison article here. 

Many commercial properties have used metal roofs due to their energy efficiency. When the sun is shining down on a metal roof, the solar heat is reflected off the roof rather than absorbed. Because of that, the interior of the building that the metal roof is cooler, which can greatly reduce cooling costs.

More and more people are investing in metal roofs due to their environmentally-friendly nature. Most metal roofs are made of recycled material, and when that metal roof can no longer be used, the material from that metal roof is recycled as well.

Metal Roofing Materials

Materials such as steel and aluminum are extremely popular for metal roofs. But plenty of metal roofs are made of stainless steel and copper. Each material has its advantages and disadvantages.

Out of all of the different metal roofs that exist, most are made from steel or aluminum. Roofs made from other metals, such as stainless steel and copper, exist but aren’t as prevalent.

Steel

Steel is a very popular roofing material due to the durability, longevity, and affordability that it offers. Steel roofs are built to withstand plenty of wear and tear, yet steel roofs are also very inexpensive. Much of this strength comes from the material itself, as well the different coatings that steel roofs use. Most steel roofs use either a galvanized coating or a galvalume coating. Both coatings enhance the durability of a steel roof.

Aluminum

Aluminum is another very popular roofing material. It is affordable and doesn’t corrode or rust in the same way steel does. But, due to the frequent bouts of intense weather that Colorado experiences, steel roofs are usually the better option since aluminum roofs tend to dent and damage far more easily.

Stainless Steel

Stainless steel roofs and copper metal roofs are less popular than roofs made of steel or aluminum. This lack of popularity comes from the fact that stainless steel and copper are very expensive materials. But, roofs made of stainless steel or copper are exceptionally durable, and this durability ensures the complete protection of the building that the roof is covering.

Are Metal Roofs Expensive?

In comparison to other roofs, metal roofs tend to be rather expensive. But, metal roofs cost as much as they do because of the benefits that they offer. As a result of these benefits, a good metal roof pays for itself.

Metal roofing is more expensive than other types of roofing. But, the higher-prices are for several very good reasons, all of which have to do with the unique benefits that metal roofing offers.

Most metal roofs last for forty-to-seventy-years. Many other roofing materials offer far less longevity, which makes a good metal roof an absolutely fantastic investment.

Metal roofs are exceptionally durable, and they can withstand all kinds of wear-and-tear. Wear-and-tear that includes things like heavy snow and thunder. Since Colorado experiences its fair share of intense weather events, this is exceptionally useful.

Many roofs require frequent maintenance and repairs, but most metal roofs don’t. Because of that, there’s no need to spend large amounts of money on repairs and maintenance, which is another reason as to why metal roofs pay for themselves.

Metal Roofing in Colorado Services

B&M metal roofing Colorado services offer a sound process and approach. Each one of the metal roofing services that we offer has to do with the fabrication and direct application of exterior architectural sheet metals. As such, we can design high-quality metal roofing systems for you, no matter if you need them for a residential or commercial property.

At B&M Roofing, we specialize in the fabrication and direct application of exterior architectural sheet metals. Through our knowledge of exterior architectural sheet metals, we offer a wide variety of different metal roofing services, all of which are related to the installation, repair, and restoration of exterior architectural sheet metals.

Our services consist of the installation, repair, and restoration of:

• Metal roofing systems.
• Metal wall panel systems.
• Gutters.
• Cornices and caps.
• Meal composite material panel systems.

We also offer services related to custom sheet metal fabrication; specialty metalwork for materials such as copper and zinc; and decorative exterior metal cladding and architectural sheet metal roofing.

At B&M Roofing, we will listen to your exact metal roofing needs and craft solutions that fulfill those exact metal roofing needs. By the time your metal roofing project is complete, all of your metal roofing needs will have been fulfilled. Contact us today for your metal roofing Colorado needs at (303) 443-5843.

Our tastes vary with almost everything, and what works for one person might work for the next, especially concerning comfort and style. The roofing system of your home or office should exude comfort and style, and this would only be possible if there were no signs of leakage and dents on it.

Tar and gravel roofs are excellent for several reasons –they shield against ultra violet rays, are affordable, and sit pretty on buildings. They can be the perfect finish your house needs, but you must take the extra step to ensure they always look well-kept. Tar and gravel roofs require maintenance and may eventually need repairs in the long run.

This article will guide you to know when your tar and gravel roof needs repair and what to do at such times.

What is a Tar and Gravel Roof?

Tar and gravel roofs are roofing sheets made of the finest materials and offer excellent health benefits to the habitants of that home or office space.

Roofing felt, hot tar, and asphalt-based sheets are laminated layers that makeup tar and gravel roofs. Light-colored gravel lines the topmost layer, shielding it from the sun’s rays and reflecting part of it into the atmosphere.

However, you must always keep an even layer of gravel on the roof, and some tiny rocks should remain loose to protect your roof from puncturing caused by foot traffic.

A tar and gravel roof might be the best option for flat-roofed homes or businesses.

The most cost-effective roof material is tar and gravel, which can last up to 30 years with routine care and repair. It is a terrific alternative for windows and decks that look out over the roof since it offers exceptional UV protection, is energy-efficient and is also an excellent choice for windows.

Since gravel surfaces reflect light rather than absorb it, it helps keep your roof cooler in the summer. Gravel is also an excellent fire retardant.

Due to its low cost and extended lifespan, a tar and gravel roof offers an excellent return on investment. Furthermore, repairs are less frequently needed due to the material’s robustness.

How to Repair a Tar and Gravel Roof

What happens when a tar and gravel roof needs some repair?

This only occurs occasionally, but when it does, there are easy and quick ways to go about it.

Regular maintenance of these types of roofs makes them last even longer.

• Check the gravel at least once a year because the roof’s deterioration is faster if the surface is unprotected.
• Fill up any gaps that might have been left on the roof with gravel.
• Get rid of any accumulated leaf litter. Since the roof is flat, rain doesn’t wash away leaves that gather there, which might lead to ponding. This ponding occurs when water remains on the roof surface for a long, usually 48 hours or more.
• You can fortify your tar and gravel roof by including additional fiberglass or foam layers to improve insulation.
• A more waterproof tar and gravel roof can also be made by adding a fresh acrylic/elastomeric “cool roof” coating.
• Mend the roofing membrane of an older tar and gravel roof. However, for a home, numerous patches could be a sign of prior leaks or weak spots. These places are prone to leak again if the patching was not correctly done in the past.

A qualified roofer should always perform every roof repair task. They can securely maintain your roof while also giving you advice on how to extend the lifespan of your roof. If patches are on one-quarter of the rooftop, you need to replace them. In addition to visible indicators like frequent patching, walking on older roofs and feeling how they are under your feet is the best method to gauge how worn out they are. Check out for cracking, open spots, depressions, degraded surfaces, and discoloration.

B&M Roofing offers after-sale and maintenance services for all roof types, and you can book an appointment today anywhere in Denver.

Tar and Gravel Roof Repair vs. Replacement

Sometimes, people mistake a roof repair for a removal and total replacement, which is unfortunate. The latter would cost you more and might not be necessary anyway. This uncertainty is the reason people employ the services of a professional roof inspector. You can save a lot of money and stress when your roof only needs a repair rather than a replacement. It might be tricky to decipher the difference between the two services, but it is possible.

Generally, when you assess the extent of the damage, it is easy to know if it needs a minor repair or a replacement. You need to replace the roof when it has holes and patches in at least 25% of the total surface area. Failure to do so is detrimental to the home residents or staff in the office space.

A roof often needs a replacement when the early sign of minor damage is ignored; it gets worse as the days pass.

You can also do a self-assessment by gently stepping over the roof with your feet to know the dented and bruised areas. This experiment will also tell you how badly damaged the roof is so that you can mend the holes and dents early enough. If you do these assessments regularly, you will be able to detect faulty parts of the roof and fix them instead of a strenuous replacement in a few months.

Tar and Gravel Roof Repair by B&M Roofing

Tar and gravel roofs are affordable if you are looking for classy and heat-resistant roofing for your home or office space.

B&M Roofing offers commercial and residential roofing services all around Colorado, and you can benefit from expert advice on what type of roofing maintenance you require. It would be best if you also cultivated the habit of regularly checking your roof in the house and office.

These checks/inspections might not sound like something people should remember to do, but it is of immense importance. It could save you money and physical injury, so it is worth every attention.

Colorado weather is tough on roofs. Between the large temperature fluctuations throughout the year, damaging storms, and the mile-high sun, Colorado weather affects roofs in several ways. These can significantly shorten their lifespans.

The lifespan of Colorado roofs is shortened by weather conditions like sub-zero temperatures, blistering heat, hail, heavy snows, torrential rains, and high winds. 

Colorado Weather and Roofs

Colorado isn’t known for extreme weather, but our mix of blistering summer days and sub-zero stretches in the winter expose homes to extremes. Over time, that can take its toll on roofing materials. So watch for extreme weather events to damage your roof, and inspect it if you fear it suffered weather damage.

Ultraviolet Radiation:

• Colorado’s most extreme weather condition is present every day of the year. Just like it’s easier to get sunburned in Colorado, it’s easier for the sun to damage your roof. With fewer ultraviolet rays filtered by the atmosphere, your roof soaks up more of the UV rays that degrade it. Expect your roof to deteriorate faster than similar conditions at sea level.

Humidity:

• Humidity, or the lack thereof, can also affect your roof. When coupled with the sun’s harsh glare, our dry air can accelerate the decay of asphalt and shake shingles.

Summer Storms:

• The Front Range and Eastern Plains are both known for sudden blasts of extreme weather. These storms frequently generate 60-mph winds and hail. Storm damage isn’t always immediately visible, so call a qualified inspector or estimator to look closely at your roof after a storm.

Ice:

• Our warm winter days are great for melting driveways. Still, the resulting overnight freeze can damage roofs when they don’t feature adequate drainage. Poorly draining rooftops – including roofs with gutters clogged with debris – lead to ice dams, which can damage roofing.

Snow:

• More of an issue in the high country than along the Front Range; the weight of snow can damage your roof or the home underneath it. Correctly pitched roofs will usually shed most snow. However, removing snow from your roof may be necessary when accumulation is particularly heavy or wet.

Colorado weather affects roofs all year long. If you fear your roof is succumbing to the climate, call B&M Roofing of Colorado today at 303.443.5843 or use our Free Estimate request.

Range of Roof Life in Colorado

Many things factor into your roof’s lifespan. At B&M Roofing, we estimate a Colorado roof will last between fifteen and thirty years. Manufacturer’s warranties may be anywhere from thirty to fifty years. However, these estimates depend on things like temperature extremes, weather conditions, and maintenance.

The type of roofing material is also a factor. Asphalt shingles, for example, do better in colder climates than in tropical heat.

Clay or concrete tile roofing is very durable and resilient. However, because they are so heavy, they must be installed on very sturdy roof structures. Clay or concrete roofs will last fifty to a hundred years.

The most durable roofing material is slate. It is expected to last a century or more.

Wood shingles have a lifespan of between twenty-five and thirty years if they are properly maintained. However, the roof must be kept free of moss and twigs so moisture is not trapped on the shingles. Fire is also a danger with this type of roof.

Cedar shakes are thicker than shingles. This means they are a good choice for Colorado’s intense heat and harsh cold winter weather. Wood shakes must be maintained to give them a lifespan of thirty-five to forty years.

Metal roofing is very resilient. Most metal roofing is steel or aluminum with a lifespan of fifty years. Copper or zinc roofing will last a century or more.

Why Get a Roof Inspection?

A new roof can prove pretty costly. But, with regular roof inspections, you can expect your roof to last longer. So, savings are significant.

Roof inspectors look for wear and tear on your roof. They can accurately estimate the life of your roof. They will make recommendations regarding necessary repairs. Certified roof inspectors can identify unsafe areas and poor-condition roofing. Roof inspectors will look at your roof’s internal and external components.

B&M Roofing Colorado: Colorado Extreme Weather

In Colorado, hail and snow storms are prevalent. They can cause a lot of damage to your roof. 

At B&M Roofing, we inspect your roofs for the Colorado wheater and offer you durable materials to be used on your roofs. We will also provide you with preventive measures in the spring before the hail season.

Call us today at 303.938.9642 to schedule a visit from our emergency repair team, or visit our leak repair request page to submit your information and have one of our team members contact you.

Our 24/7 support line is here to help immediately with emergency roof repair. Calling sooner means less of a wait and more opportunities to repair before extensive damage is done. We offer work throughout Colorado, including:

• Denver
• Colorado Springs
• Fort Collins
• Boulder
• Greeley
• Rocky Mountain areas
• Surrounding states, including Wyoming, Utah, Kansas, Nebraska

The day will come when every Colorado business property will need to seek the services of a commercial roofing company in Denver. Maintaining roof integrity is essential to maintaining the health and wellness of your property’s tenants, reducing your carbon footprint by lowering energy costs, and protecting your capital investment.

How Long Does a Commercial Property Roof Last in Denver?

Having a relationship with a commercial roofing company in Denver is essential to address any primary signs of roof problems quickly. A few early signs inside are leaks, watermarks, visible signs of wear, or mold.

Here are a few factors that may contribute to the degradation of the integrity of a commercial roof. 

Weather

As a commercial roofing company in Denver, B&M Roofing understands the unique challenges we face in Colorado – dry, hot summers and icy-cold, snowy Rocky Mountain winters.

The hot summer sun can damage the sealant materials, which can crack or swell during the season-long heating cycle during the day and cooling at night.

Ice, in particular, can cause significant damage to a roof. It weighs 57.2 pounds per square foot, which is heavy enough to cause minor stress cracks and fissures. As it melts and turns back to a liquid, that water can drip into small gaps and later expand and refreeze, exacerbating the problem.

Roofing Materials

The type of roofing materials also weighs into the lifespan of your roof. As with a residential roof, which most are more familiar with, the material composition is critical to longevity.

For instance, commercial-grade asphalt shingles might last twenty to thirty years, while an architectural sheet metal roof could last between forty to fifty years.

Roof Pitch

The best commercial roofing company in Denver would also understand the significance of roof pitch to a longer-lasting structure. Many commercial property owners opt for a flat roof during the initial build-out to save money.

However, that option could be a mistake – water stands on the top, weakening the structure and contributing to leaks.

As a result, many commercial property owners around Denver now see the value in spending the extra money on a low-sloped roof. This small pitch gives enough movement to rainwater or melting snow or ice to evacuate the structure and minimize the damage.

Hiring the most experienced and best commercial roofing company in Denver, B&M Roofing, will help you learn all your options. Plus, they can help you determine the best options to maximize profits and safety when it’s time to repair, replace, or upgrade your building.

How to Select the Best Commercial Roofing Company in Denver

Because your building is a significant investment, you want to find the best commercial roofing company in Denver. Here are five factors to help you decide.

Review the Company’s Experience

Experience matters. Each job has unique challenges, and only the most experienced crews understand how to deal with problems that arise effectively and competently.

B&M Roofing has completed thousands of jobs at shopping centers, industrial facilities, and other commercial properties since 1947. We bring a breadth of know-how to your job.

Review the Company’s Reputation

At B&M Roofing, we have nothing to hide. We are transparent and gladly share customer testimonials from commercial property managers and residential clients. They rave about our professionalism, commitment to quality, and expertise. In fact, many refer their friends, family, and colleagues to us when they need help with a roof replacement – that is a true display of their confidence!

Please don’t take our word for it. Read our client testimonials for yourself.

Inquire About the Commercial Roofing Company’s Safety Standards

The best commercial roofing company in Denver will commit to job site safety to protect its employees and others around the area.

B&M Roofing creates a culture of employee safety that goes above and beyond industry standards. A few steps we take to protect our staff include these:

• Weekly “tool box talks,” a review of safety pitfalls and current OSHA regulations.
• Six-month safety meetings to keep safety compliance at the top of mind for all staff – both new and our most experienced team members attend these sessions.
• Fall protection training.
• New hire orientation to ensure new staffers are on the same page with the rest of our team before they step foot on a job site.
• Vehicle operations training to certify equipment operators meet or exceed all OSHA and Colorado DOT requirements.

Ask if the Commercial Roofing Company in Denver Holds the Appropriate Licensing

Each residential and commercial roofing company should hold a general contractor’s license and appropriate local business permitting to comply with Colorado law. If a company does not have these things, it is a clear sign of trouble.

These laws help to ensure the industry’s integrity and protect consumers from fraudulent companies who permeate the industry – here today, gone tomorrow. We have all heard these nightmare stories, and our company gladly reassures our clients that we stand against unscrupulous practices. B&M Roofing calls the Denver area home, and we fully comply with state and local laws wherever we operate.

Find Out if the Contractors Carry Insurance

Reputable commercial roofing contractors in Denver will carry general liability, vehicle, and workers’ compensation insurance. Avoid companies that skimp on insurance coverage. If they cut this corner, they are also open to cutting others.

B&M Roofing Meets All the Standards to Qualify as the Best Commercial Roofing Company in Denver

If you’re looking for a commercial roofing company in Denver, B&M Roofing:

• Has over seventy years of service to commercial and residential property owners in Colorado.
• Understands all that must go into a high-quality, long-lasting, and beautiful roof.
• A renowned reputation for commitment to quality work.
• Thousands of testimonials from satisfied customers.
• Meets or exceeds all industry safety standards and OSHA requirements.
• Complies with all state and local licensing laws.

We service commercial (and residential) roofs in the following Colorado communities:

• Denver
• Colorado Springs
• Boulder
• Fort Collins
• Greeley
• Surrounding Front Range area

Please use our convenient online contact form if you do not see your community listed above. One of our professional customer service staff will respond to you promptly to discuss your needs.

Anyone looking for roof replacement in Colorado – homeowner or commercial building owner – likely has many questions before taking the leap. The pros at B&M Roofing have guided thousands of customers through the process.

Colorado property owners face unique challenges, like scorching, sunny summers and frigid winters, that make roof replacement essential to personal health and safety.

Seven Signs You Need Roof Replacement on Your Colorado Property

Fortunately, you often see a few key indicators that can serve as early warnings. Here are seven factors that reveal the need for roof replacement in Colorado:

Weathered Roof Joints and Junctions

If your building has a sloped roof, it likely has some weak points in the joints and junctions. As a result of harsh Colorado weather conditions – think rain, snow, and complete, direct sunshine–the joints may suffer from wear and tear. Weathering for an extended period causes the shingles to become brittle. In the case of a flat roof, leakage happens as a result of poor quality or cold concrete joints.

A Rattling or Noisy Roof

The material of the shingles makes a massive difference in how often you must replace them. It might also dictate whether your roof requires a minor repair or total roof replacement.

Furthermore, some materials may rattle from high winds; that vibration causes them to loosen in the wind. Additionally, the screws can loosen because of windy conditions, enlarging the holes little by little. Eventually, you may see leaks appear.

Missing or Broken Shingles

Often, your roof takes much physical damage, causing broken shingles. This damage is a visibly unattractive sight. Moreover, it often leads to unnecessary problems in the future if you do not have a roof replacement company fix it.

Are the edges of the shingles curled, cupped, or cracked? It could mean that your roof suffered the impacts of weathering. Constant exposure to sun, wind, hail, and snow, creates bald spots where the granules on your shingles wear away. This erosion makes your home look older and untidy.

Water Seeping Into the Structure’s Interior

When you don’t address damaged shingles or joints, you run a risk that water may permeate the attic joists and ceiling. Here’s why.

Over time, any water that collects underneath the shingles will seep into the wood structures. As a result, the moisture may cause porous materials to warp, swell, or crack. It may even lead to wood rot. Eventually, this causes structural damage. You must not ignore the issue of loose or broken shingles for too long. Indeed, even a tiny crack can cause water to trickle inside.

Structural Shifting of the Building

The greater your structure’s age, the greater the chances the framework of your roof has sustained shock and stress. Modern roof shingles are durable, but they are not immune to the impacts of a building settling or minor, usually unnoticeable shifts or tremors under the earth’s surface. Although this is not a common factor for roof replacement in Colorado, it is something to keep in mind.

The Age Factor

Is your roof over 20 to 25 years old? That age range represents the typical useful life of a shingled roof. In this age range, a repair usually will not suffice. Age weakens the structure, as it faces the cumulative impact of all the above-listed factors. Even worse, these weaknesses multiply to cause large-scale damage over time.

Dark Streaks on the Shingles

Those darkened areas are not waterlogged; they host mold or mildew colonies.

Because your roof is constantly exposed to air and moisture, it is also prone to airborne algae that will create dark streaks on the shingles. Moss, mold, and mildew flourish on damp, low-sunlight spots on roof surfaces, especially in cool, shady, and moist conditions.

What Is the Best Time of the Year for Roof Replacement in Colorado?

You might wonder what season is best for roof replacement in Colorado. Warm, dry weather is optimal if you have the luxury of planning. However, emergencies often happen during the “off-season.” Of course, the professionals at B&M Roofing stand by to help their customers any time of the year.

Should You Stay Home or Leave During Roof Replacement in Colorado?

Another question you might have is this. Should I stay home during roof replacement?

Here are a few factors to consider:

• Noise levels: Roof replacement is inevitably noisy. If you want to stay home and relax, that’s one thing. But if you need to concentrate on work, you might find it hard to focus.
• Scope of work: You should plan to shut off your home comfort systems during a roof replacement; there is no reason to operate your heating or air conditioning – especially if your job requires sheathing replacement.
• Pets: Your pets might find the process stressful. Some homeowners find it best to board their pets at a pet daycare on roofing day to avoid the stress, noise, or even accidentally slipping outside.
• Safety: The final, and most important consideration, is the safety factor. The crew will walk across your roof, use tools and equipment, and perhaps even block your vehicle in the driveway.

Because of the many variables that cause disruption of a customer’s routine on a job site, many roof replacement specialists in Colorado would prefer you stay safely off the premises while they work.

Cost Factors for Roof Replacement in Colorado

Now that you see the signs that indicate the need to replace your roof, you probably want to know the price tag that comes along with roof replacement in Colorado..

The total roof replacement cost in Colorado varies depending on various factors. Here are a few things that impact the cost:

• The desired roofing material: Do you want asphalt shingles or metal roofing?
• Does your home have structural damage: Has a water leak caused damage to the sheathing or joists?
• The size of your roof: An expansive commercial roofing job is far costlier than a residential roof replacement based on labor and materials costs.

Put your mind at ease about the investment in a new roof by contacting B&M Roofing for a free quote for your job. They are fully insured, licensed general contractors as required by Colorado law and will handle the entire job, from pulling the roof permit to leaving your home pristine when they leave.

You can request a free estimate from B&M Roofing here.

Choose B&M Roofing for Roof Replacement in Colorado

Partnering with an experienced team like B&M Roofing makes roof replacement in Colorado a good experience. We help residential and commercial property owners with roof replacement in Colorado in these locations:

• Denver
• Fort Collins
• Boulder
• Colorado Springs
• Greeley

Unsure if you are within our service area?

Use our contact form and our friendly staff will assist you.